Image differs from product
Right Angle Gearing
Morse 325UR10
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
Key Length
1.63
N
7.06
B
8.5
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- Key Length
- 1.63
- N
- 7.06
- B
- 8.5
- C
- 9.38
- Reducer Style
- Standard
- J
- 7.5
- M
- 2.31
- Input Speed
- 1750
- D
- 3.5
- K
- 3.75
- H
- 3.5
- F
- 4
- L
- 7.06
- Ratio
- 10:1
- X
- 0.88
- Y
- 2.38
- Shaft Seal Material
- Nitrile
- V
- 3.42
- O
- 3.25
- Key Sq.
- 0.188
- Max Thrust Load (Output Shaft)
- 2964
- Efficiency
- 80
- U
- 0.875
- Ratio Range
- 10:1
- Center Distance (in)
- 3.25
- A
- 5
- Reducer
- Worm - Right Angle
- G
- 2
- T
- 1.375
- Output Diameter (in)
- 1.375
- Input Keyway
- 3/16 X 1.63
- Assembly
- U-R
- Input RPM
- 1,750
- Output RPM
- 175
- Output Shaft Assembly Code
- R
- Input HP @ 1750 RPM
- 7.23
- H Tap Size
- 7/16 - 14
- Input Style
- Solid Shaft
- No. of Gear Reductions
- Single
- Model Code
- 325U
- Product Type
- Worm Speed Reducer
- Output Key
- 5/16 X 2.88
- Mounting Style
- No Base
- Service Factor
- 1
- Center Distance Range
- 1" thru 3.25"
- H Depth
- 0.8
- I
- 4.5
- Gear Type
- Worm
- Cd
- 3.25
- Input Diameter (in)
- 0.875
- E
- 3.75
- Output Torque Range
- 2500 to 5000 in lbs
- HP Range
- 7-1/2 (< 10)
- Output Shaft Direction
- Right
- Housing Material
- Cast Iron
- Overhung Load Rating (Output Shaft(lb))
- 2,401
- Output Torque Rating (in-lb)
- 2700 in-lbs @1750 input RPM
- Output Shaft
- Solid Shaft
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 325UR10
- Mfg. Part Numberi
- XI1013
- GDS #i
- GDS-123615
- Categoryi
- Right Angle Gearing
- UPCi
- 662288361060
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 325UR10?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 325UR10, manufacturer article number XI1013. Its UPC is 662288361060.
