Image differs from product
Right Angle Gearing
Morse 325UR30
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
L
7.06
X
0.88
Key Length
1.63
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- L
- 7.06
- X
- 0.88
- Key Length
- 1.63
- Shaft Seal Material
- Nitrile
- H
- 3.5
- K
- 3.75
- O
- 3.25
- Reducer Style
- Standard
- B
- 8.5
- D
- 3.5
- J
- 7.5
- V
- 3.42
- C
- 9.38
- Input Speed
- 1750
- Efficiency
- 80
- Max Thrust Load (Output Shaft)
- 3410
- M
- 2.31
- Ratio
- 30:1
- Y
- 2.38
- Key Sq.
- 0.188
- F
- 4
- N
- 7.06
- Gear Type
- Worm
- Cd
- 3.25
- Center Distance Range
- 1" thru 3.25"
- H Depth
- 0.8
- Input Keyway
- 3/16 X 1.63
- Assembly
- U-R
- Output Diameter (in)
- 1.375
- Input RPM
- 1,750
- G
- 2
- No. of Gear Reductions
- Single
- Output RPM
- 58.3
- Output Shaft Assembly Code
- R
- Product Type
- Worm Speed Reducer
- Service Factor
- 1
- Model Code
- 325U
- Center Distance (in)
- 3.25
- Input Diameter (in)
- 0.875
- Ratio Range
- 30:1
- T
- 1.375
- I
- 4.5
- H Tap Size
- 7/16 - 14
- Reducer
- Worm - Right Angle
- Mounting Style
- No Base
- Input Style
- Solid Shaft
- E
- 3.75
- A
- 5
- Output Key
- 5/16 X 2.88
- U
- 0.875
- Input HP @ 1750 RPM
- 3.14
- HP Range
- 3HP (< 5)
- Output Torque Range
- 2500 to 5000 in lbs
- Output Shaft Direction
- Right
- Output Shaft
- Solid Shaft
- Output Torque Rating (in-lb)
- 3226 in-lbs @1750 input RPM
- Housing Material
- Cast Iron
- Overhung Load Rating (Output Shaft(lb))
- 2,401
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 325UR30
- Mfg. Part Numberi
- XI1017
- GDS #i
- GDS-123619
- Categoryi
- Right Angle Gearing
- UPCi
- 662288361091
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 325UR30?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 325UR30, manufacturer article number XI1017. Its UPC is 662288361091.
