- Seal Type
- Single Lip Contact Seal
- Measure Units
- Metric
- Rolling Element
- Ball Bearing
- Insert Material
- 52100 Bearing Steel, Black Oxided
- Internal Clearance
- Standard
- Misalignment
- ±2.0° Misalignment - Static Only
- Radial Dynamic Load Capacity (lb)
- 7,889 lb
- Bore Shape
- Straight
- Housing Construction
- One Piece
- Bearing Insert Coating
- Black Oxide Coated
- Outer Ring Land Profile
- Standard
- End Cap
- No
- Overall Height (in)
- 4.63 in
- Overall Length (in)
- 5.88 in
- Overall Width (in)
- 2.19 in
- Misalignment Type
- Static Only
- Housing Color
- Black
- Base to Center Height (in)
- 3.57 in
- Cage Material
- PPS - Polyphenylene Sulfide
- Length Through Bore (in)
- 2.027 in
- Slot Width (in)
- 0.688 in
- Housing Type (Product Selection)
- Take-Up Block, Wide Slot
- Seal Type (Product Selection)
- Single Lip Contact Seal
- Slot Length (in)
- 3.38 in
- Housing Style
- Take-Up Block
- Adjusting Screw Square Nut Seat Height (in)
- 1.94 in
- Ability to Relubricate
- Yes
- Inner Race Heat Treat Method
- Zone-Hardened
- Slot Spacing (in)
- 4 in
- Carriage Bolt Size (in)
- 3/4 in
- Adjusting Screw Clearance Hole Diameter (in)
- 1.13 in
- Fixed vs. Expansion
- Fixed
- Grease Fitting Thread Size
- 1/8 NPT
- Housing Material
- Cast Iron
- Shaft Locking Type
- Set Screw
- Vibration Frequency Outer Ring Defect
- 0.0683 cps
- Vibration Frequency Roller Spin
- 0.0445 cps
- Vibration Frequency Fundamental Train
- 0.0068 cps
- Max Operating Temperature (F)
- 220 °F
- Radial Clearance
- Standard
- End Cap Available
- No
- Size Code
- 2-115
- Vibration Frequency Inner Ring Defect
- 0.0984 cps
- Lubricant
- Lithium Complex NLGI 2 Grease
- Misalignment Capability
- ±2.0° Misalignment - Static Only
- Dynamic Load Rating (lb)
- 7,889 lb
- Cage Type
- Land Riding Retainer
- Centerline to Outermost Bearing Face (in)
- 1.281 in
- Bearing Type
- Standard Duty
- Static Load Rating (lb)
- 5,216 lb
- Inner Ring Outside Diameter (in)
- 2.469 in
- Bearing Insert Finish
- Black Oxide
- Housing Coating
- Powder Coated
- Maximum Speed (RPM)
- 3550 rpm
- Bearing Insert Material
- 52100 Bearing Steel
Always verify dimensions, load ratings, material, and seal type before ordering.