Product Overview
- Browning offers one of the largest selection of application shaft ready sprockets in the industry
- Easy Installation and removal
- Split Taper Bushing are available in popular Inch, Metric and Spline bore
- Hardened Teeth at No Extra Cost - Drive Sizes up to 30 teeth on 35 through 160 Chain
- Material
- Steel
- Bore (Max) (in)
- 2.6875
- Number of Teeth
- 16
- Bore (Min) (in)
- 0.75
- Minimum Bore (in)
- 0.75
- Chain Pitch (in)
- 1 in
- Mounting Style
- Browning Bushing
- Number of Strands
- 2
- Max Bore (in)
- 2.6875 in
- Pitch
- 80
- Product Type
- Bushed Roller Chain Sprocket
- Width Across Tooth Sets
- 1.71
- Min Bore (in)
- 0.75 in
- Pitch Diameter (in)
- 5.1258 in
- Overall Length (in)
- 2.7813 in
- Outside Diameter (in)
- 5.627 in
- Bore Type
- Bushed Bore
- Number of Strands/Width
- 2
- Tooth Width (in)
- 0.557 in
- Length Through Bore (in)
- 2.5 in
- Hub Diameter (in)
- 4.125 in
- Maximum Bore (in)
- 2.6875 in
- Maximum Bore (mm)
- 65 mm
- Minimum Bore (mm)
- 18 mm
- Hardened Teeth
- No
- Hub Projection (in)
- 0.844 in
- Pitch Type
- Single
- Overall Width (in)
- 2.7813 in
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- D80Q16
- Mfg. Part Numberi
- 1174911
- GDS #i
- GDS-105489
- Categoryi
- Sprockets
- UPCi
- 662289219605
- Chain Usedi
- No. 80, 1 in. Pitch ANSI Chain
- Bushing Usedi
- Split Taper
- Country of Origini
- China
Documents & Support
- Catalog PageView
Common Questions
What is the outside diameter of the D80Q16?
The D80Q16 has a outside diameter of 5.627 in. The specification table above lists every published dimension for this part.
Are volume discounts available for the D80Q16?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning D80Q16, manufacturer article number 1174911. Its UPC is 662289219605.
