Browning SH 1 3/8 3/8
QD BUSHINGS-600
This part has been discontinued.
Contact us for an alternative.
Product Type
Q-D Bushing
Material
Ductile Iron - 65-45-17
Compatible Bore Size [Max] (in)
1.375
Cap Screws (Size)
1/4-20 x 1 3/8
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Reverse mounting ability - This bushing system allows for mounting on either side of the product to allow for a more flush view of the product face.
- 3/4"/ft. Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product.
- Material
- Ductile Iron - 65-45-17
- Compatible Bore Size [Max] (in)
- 1.375
- Product Type
- Q-D Bushing
- Cap Screws (Size)
- 1/4-20 x 1 3/8
- Outside Diameter (in)
- 2.6875
- Cap Screws (Bolt Circle)
- 2.25
- Total Length (in)
- 1.2
- Length Through Bore (in)
- 1.2
- Wrench Torque (ft.-lbs.)
- 9
- Bore Type
- Inch
- Bushing Type
- SH
- Mounting Type
- Conventional
- Cap Screws (No.)
- 3
- Torque Capacity (in-lb)
- 3,500
- Keyway
- 3/8 x 3/16
- Bore Size (in)
- 1.375
- Flange Thickness
- 0.45
- Barrel Length
- 0.75
- Barrel Diameter
- 1.871
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- SH 1 3/8 3/8
- Mfg. Part Numberi
- 1077684
- GDS #i
- GDS-104022
- Categoryi
- Q-D Bushings
- UPCi
- 662289405558
- Model Namei
- QD-SH_Bushing_Master
Common Questions
Has the Browning SH 1 3/8 3/8 been discontinued?
Yes. Browning has discontinued the SH 1 3/8 3/8. Contact us for cross-reference help finding a suitable replacement.
Are volume discounts available for the SH 1 3/8 3/8?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning SH 1 3/8 3/8, manufacturer article number 1077684. Its UPC is 662289405558.
