Browning SH 25 MM
QD BUSHINGS-600
This part has been discontinued.
Contact us for an alternative.
Product Type
Q-D Bushing
Material
Ductile Iron - 65-45-27
Total Length (in)
1.2
Keyway
8mm x 3.5mm
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Reverse mounting ability - This bushing system allows for mounting on either side of the product to allow for a more flush view of the product face.
- 3/4"/ft. Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product.
- Material
- Ductile Iron - 65-45-27
- Total Length (in)
- 1.2
- Keyway
- 8mm x 3.5mm
- Wrench Torque (ft.-lbs.)
- 9
- Bushing Type
- SH
- Cap Screws (Bolt Circle)
- 2.25
- Torque Capacity (in-lb)
- 3,500
- Outside Diameter (mm)
- 68.2625
- Total Length (mm)
- 30.48
- Compatible Bore Size [Max] (mm)
- 25
- Cap Screws (No.)
- 3
- Outside Diameter (in)
- 2.6875
- Product Type
- Q-D Bushing
- Mounting Type
- Conventional
- Cap Screws (Size)
- 1/4-20 x 1 3/8
- Bore Type
- Metric
- Length Through Bore (mm)
- 30.48
- Bore Size (mm)
- 25
- Flange Thickness
- 0.45
- Barrel Diameter
- 1.871
- Barrel Length
- 0.75
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- SH 25 MM
- Mfg. Part Numberi
- 3207974
- GDS #i
- GDS-112087
- Categoryi
- Q-D Bushings
- UPCi
- 662289616299
- Model Namei
- QD-SH_Bushing_Master
Common Questions
Has the Browning SH 25 MM been discontinued?
Yes. Browning has discontinued the SH 25 MM. Contact us for cross-reference help finding a suitable replacement.
Are volume discounts available for the SH 25 MM?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning SH 25 MM, manufacturer article number 3207974. Its UPC is 662289616299.
