- Duty Series
- Standard
- Seal Type
- Single Lip Contact Seal with Flinger
- Rolling Element
- Ball Bearing
- Housing Type
- Insert (ER Style)
- Radius
- 0.04
- Inner-Race Heat-Treat Method
- Zone-Hardened
- Bore Shape
- Straight
- Retainer Type
- Ball Riding Retainer
- Insert Material
- 52100 Bearing Steel; Black Oxided Inner
- Maximum Operating Temperature
- 200 °F
- Measure Units
- Inch
- Lubrication
- Lithium Complex NLGI 2 Grease
- Locking Type
- Setscrew
- Duty/Series
- Standard
- Operating Temperature Range (F)
- -20° to 200°F
- Dynamic Load Rating (N)
- 19,487
- Dynamic Load Rating (lb)
- 4,381
- Set Screw Thread
- 1/4-28 UNF
- Overall Width (in)
- 1.5 in
- Internal Clearance
- Standard
- Expansion
- No
- Misalignment
- None
- End Cap
- No
- Misalignment Type
- Static Only
- Bearing Insert Coating
- Black Oxide Inner Ring
- Outer Ring Land Profile
- Standard
- Outer Race OD (in)
- 2.4409 in
- Outer Race OD (mm)
- 62 mm
- Centerline to Front Face (in)
- 0.875 in
- Outer Race Width (in)
- 0.875 in
- Inner Ring OD (in)
- 1.594 in
- Precision Rating
- ABEC 1
- Cage Material
- Molded fiber glass reinforced nylon
- Length Through Bore (in)
- 1.5 in
- Inner Race Profile
- Wide Inner Ring
- Outer Race Profile
- Cylindrical
- Setscrew Torque (in-lbs)
- 65-85 in/lbs
- Inner Race Heat Treat Method
- Zone-Hardened
- Maximum Operating Temperature (F)
- 200 °F
- Outer Race Width (mm)
- 22.2 mm
- Ability to Relubricate
- Yes
- Duty/Status
- Standard
- Inner Ring Fillet Radius (in)
- 0.04 in
- Static Load Rating (lb)
- 2,567 lb
- Cage Type
- Ball Riding Retainer
Always verify dimensions, load ratings, material, and seal type before ordering.