Browning YSM10B25
Browning Steel Minimum Plain Bore Miter Gear - 20 PA 10 DP
This part has been discontinued.
Contact us for an alternative.
Product Type
Miter Gear
Material
Steel
Hub Diameter (in)
2 in
Face Width (in)
0.55 in
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Bevel and Miter Gears Develop Axial Thrust; Adequate Bearing support Must be Provided
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears. Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral.
- Browning Gears are rated in accordance with AGMA standards
- Material
- Steel
- Hub Diameter (in)
- 2 in
- Face Width (in)
- 0.55 in
- Pitch Diameter (in)
- 2.5 in
- Hub Projection (in)
- 1.625 in
- Number of Teeth/Threads
- 25
- Mounting Distance
- 2.438
- Pressure Angle
- 20
- Diametral Pitch
- 10
- Bore (Max) (in)
- 1.25 in
- Bore Type
- Minimum Plain Bore
- Bore (Min) (in)
- 0.75 in
- Length Through Bore (in)
- 1.625 in
- Product Type
- Miter Gear
- Bore Size (in)
- 0.75 in
- Hub Type
- Type B
- Overall Length (in)
- 1.625 in
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- YSM10B25
- Mfg. Part Numberi
- 1229269
- GDS #i
- GDS-105973
- Categoryi
- Open Gearing
- UPCi
- 662289236824
- Country of Origini
- India
Documents & Support
Datasheets, CAD drawings, and installation instructions are available on request.
Request Documentation