- Measure Units
- Inch
- Rolling Element
- Ball Bearing
- Seal Type
- High Temp Labyrinth
- Bore Shape
- Straight
- Insert Material
- 52100 Bearing Steel, Black Oxided
- Housing Base
- Solid
- Pilot Configuration
- No Pilot
- Misalignment
- ±2.0° Misalignment - Static Only
- Housing Construction
- One Piece
- Internal Clearance
- Increased
- Outer Ring Land Profile
- Standard
- Bearing Insert Coating
- Black Oxide Coated
- End Cap
- No
- Duty/Series
- Standard
- Optional Seal
- Contact
- Operating Temperature Range (F)
- -20° to 220°F
- Dynamic Load Rating (N)
- 66,004
- Dynamic Load Rating (lb)
- 14,839
- Bolt Size (in)
- 3/4
- Overall Width (in)
- 7.75 in
- Overall Length (in)
- 7.75 in
- Overall Height (in)
- 3.188 in
- Options
- High Temperature and Air Handling Housing Fit, Noise Tested
- Housing Color
- Black
- Misalignment Type
- Static Only
- Foot Height (in)
- 1 in
- Cage Material
- Brass
- Length Through Bore (in)
- 3.06 in
- Housing Type (Product Selection)
- Flange, Four Bolt
- Seal Type (Product Selection)
- High Temp Labyrinth Seal
- Housing Style
- Flange Block
- Setscrew Torque (in-lbs)
- 350-450 in/lbs
- Inner Race Heat Treat Method
- Zone-Hardened
- Ability to Relubricate
- Yes
- Inner Ring Outside Diameter (in)
- 3.644 in
- Bearing Type
- Standard Duty
- Lubricant
- Synthetic NLGI 2 High Temperature Grease
- Housing Backside Inner Diameter
- 5.88
- Cage Type
- Land Riding Retainer
- Misalignment Capability
- ±2.0° Misalignment - Static Only
- Housing Material
- Cast Iron
- Maximum Speed (RPM)
- 1050 rpm
- Max Operating Temperature (F)
- 400 °F
- Shaft Locking Type
- Set Screw
- Fixed vs. Expansion
- Fixed
- End Cap Available
- No
- Size Code
- 2-215
- Radial Clearance
- Increased
- Grease Fitting Thread Size
- 1/8 NPT
- Bearing Insert Material
- 52100 Bearing Steel
- Housing Coating
- Powder Coated
- Bolt Spacing (in)
- 6.0000 in
- Static Load Rating (lb)
- 11,224 lb
- Bearing Insert Finish
- Black Oxide
Always verify dimensions, load ratings, material, and seal type before ordering.