Insert Bearings
Sealmaster SS-19
Sealmaster Mounted Insert Only Ball Bearing - 440C Stainless Steel - SS Setscrew Lock - Corrosion Resistant - SS-19
Series
SS
Dynamic Load Rating (lb)
3,724
Housing Type (Product Selection)
Insert Only
Length Through Bore (in)
1.5
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- 440C Stainless steel for corrosion resistance.
- High performance triple lip contact seal design provides multi-directional sealing with 304 stainless steel body and flinger to minimize contamination ingress and retain lubrication
- Zone hardened inner ring with 120° spacing setscrew lock with corrosion resistant setscrews
- Unique land riding retainer design provides superior pocket clearance that allows for 360° grease circulation around the rolling elements resulting in better retained and utilized lubrication.
- USDA H1 complaint food grade grease
- Housing Type (Product Selection)
- Insert Only
- Length Through Bore (in)
- 1.5
- Bore Size - Inch
- 1.1875Shaft size chart
- Seal Type (Product Selection)
- Multi-Lip Contact Seal
- Options
- Corrosion Resistant
- Bore Shape
- Straight
- Overall Width (in)
- 1.5
- Outer Ring Land Profile
- Standard
- Misalignment Type
- Static Only
- Cage Material
- PPS - Polyphenylene Sulfide
- Certifications
- IP69K
- Rolling Element
- Ball Bearing
- Outside Diameter (in)
- 2.441
- Inner Race Heat Treat Method
- Through Hardened with annealed set screw hole
- Ability to Relubricate
- Yes
- Max Operating Temperature (F)
- 220
- Bearing Insert Material
- 440C Stainless Steel
- Shaft Locking Type
- Set Screw
- Dynamic Load Rating (lb)
- 3,724
- Lubricant
- Calcium Sulfonate NLGI 2 NSF H1 Food Grade Grease
- Centerline to Outermost Bearing Face (in)
- 0.875
- Radial Clearance
- Standard
- Fixed vs. Expansion
- Fixed
- Cage Type
- Land Riding Retainer
- Static Load Rating (lb)
- 2,182
- Maximum Speed (RPM)
- 2300
- Inner Ring Outside Diameter (in)
- 1.594
- End Cap Available
- No
- Misalignment Capability
- ±2.0° Misalignment - Static Only
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Sealmaster
- Mfg. Catalog Numberi
- SS-19
- Mfg. Part Numberi
- 728547
- GDS #i
- GDS-119173
- Categoryi
- Insert Bearings
- UPCi
- 662461422045
- Seriesi
- SS
Common Questions
Is this a genuine Sealmaster part?
Yes. GDS Supply supplies the genuine Sealmaster SS-19, manufacturer article number 728547. Its UPC is 662461422045.
