Insert Bearings
Sealmaster SS-24
Sealmaster Mounted Insert Only Ball Bearing - 440C Stainless Steel - SS Setscrew Lock - Corrosion Resistant - SS-24
Series
SS
Dynamic Load Rating (lb)
6,239
Rolling Element
Ball Bearing
Housing Type (Product Selection)
Insert Only
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- 440C Stainless steel for corrosion resistance.
- High performance triple lip contact seal design provides multi-directional sealing with 304 stainless steel body and flinger to minimize contamination ingress and retain lubrication
- Zone hardened inner ring with 120° spacing setscrew lock with corrosion resistant setscrews
- Unique land riding retainer design provides superior pocket clearance that allows for 360° grease circulation around the rolling elements resulting in better retained and utilized lubrication.
- USDA H1 complaint food grade grease
- Rolling Element
- Ball Bearing
- Housing Type (Product Selection)
- Insert Only
- Misalignment Type
- Static Only
- Outer Ring Land Profile
- Standard
- Cage Material
- PPS - Polyphenylene Sulfide
- Options
- Corrosion Resistant
- Bore Shape
- Straight
- Overall Width (in)
- 1.94
- Length Through Bore (in)
- 1.938
- Seal Type (Product Selection)
- Multi-Lip Contact Seal
- Bore Size - Inch
- 1.5Shaft size chart
- Certifications
- IP69K
- Outside Diameter (in)
- 3.15
- Ability to Relubricate
- Yes
- Inner Race Heat Treat Method
- Through Hardened with annealed set screw hole
- Maximum Speed (RPM)
- 1750
- Radial Clearance
- Standard
- Static Load Rating (lb)
- 4,467
- Misalignment Capability
- ±2.0° Misalignment - Static Only
- Max Operating Temperature (F)
- 220
- Dynamic Load Rating (lb)
- 6,239
- End Cap Available
- No
- Fixed vs. Expansion
- Fixed
- Cage Type
- Land Riding Retainer
- Centerline to Outermost Bearing Face (in)
- 1.188
- Shaft Locking Type
- Set Screw
- Lubricant
- Calcium Sulfonate NLGI 2 NSF H1 Food Grade Grease
- Inner Ring Outside Diameter (in)
- 2.063
- Bearing Insert Material
- 440C Stainless Steel
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Sealmaster
- Mfg. Catalog Numberi
- SS-24
- Mfg. Part Numberi
- 728550
- GDS #i
- GDS-119176
- Categoryi
- Insert Bearings
- UPCi
- 662461422076
- Seriesi
- SS
Common Questions
Is this a genuine Sealmaster part?
Yes. GDS Supply supplies the genuine Sealmaster SS-24, manufacturer article number 728550. Its UPC is 662461422076.
