Browning offers one of the largest selection of application shaft ready sprockets in the industry
Easy Installation and removal
Split Taper Bushing are available in popular Inch, Metric and Spline bore
Hardened Teeth at No Extra Cost - Drive Sizes up to 30 teeth on 35 through 160 Chain
Product details
Specifications
Material
Steel
Min Bore (in)
1.125 in
Bore (Min) (in)
1.125
Bore (Max) (in)
3.75
Product Type
Bushed Roller Chain Sprocket
Minimum Bore (in)
1.125
Number of Teeth
32
Pitch Diameter (in)
12.753 in
Pitch
100
Mounting Style
Browning Bushing
Number of Strands
1
Max Bore (in)
3.75 in
Width Across Tooth Sets
0.692
Chain Pitch (in)
1.25 in
Outside Diameter (in)
13.441 in
Overall Length (in)
3.2194 in
Bore Type
Bushed Bore
Number of Strands/Width
1
Hub Diameter (in)
5.375 in
Length Through Bore (in)
2.875 in
Tooth Width (in)
0.692 in
Maximum Bore (in)
3.75 in
Minimum Bore (mm)
28 mm
Maximum Bore (mm)
95 mm
Number of Hubs
1
Hub Projection (in)
2.188 in
Hardened Teeth
No
Pitch Type
Single
Overall Width (in)
3.1563 in
Always verify dimensions, load ratings, material, and seal type before ordering.
Identification
BrandiManufacturer or product brand
Browning
Mfg. Catalog NumberiManufacturer catalog number
100R32
Mfg. Part NumberiManufacturer part number
1172501
GDS #iGDS internal part number
GDS-105361
CategoryiCatalog classification
Sprockets
UPCiUniversal Product Code
662289107452
Chain UsediChain this sprocket is cut for
No. 100, 1-1/4 in. Pitch ANSI Chain
Bushing UsediBushing designation this part is bored for
Split Taper
Country of OriginiWhere this part is manufactured
China
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Cross reference for Browning 100R32
Part numbers from other manufacturers that are interchangeable with Browning 100R32. Pick a brand, or check a number.
Dodge 4
100636
100B32
100BTL32-3020
105147
Martin 3
100B32
100BTB32
100E32
UST 3
100B32
100BTL32
100E32
Your number not listed? Ask us to cross it and we will confirm an equivalent and quote it.
Other manufacturers’ names and part numbers identify interchangeable products only; GDS Supply is not affiliated with them. Confirm critical dimensions before ordering.
The 100R32 has a outside diameter of 13.441 in. The specification table above lists every published dimension for this part.
Are volume discounts available for the 100R32?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning 100R32, manufacturer article number 1172501. Its UPC is 662289107452.